Home / Industries / Bulk Materials Handling
Three gates, three manuals, one wrong page.
Ports, terminals and handling plants run conveyors, transfer chutes, gates, stackers and reclaimers. Many look the same and share a name, so a wrong manual is an easy mistake.
Start a pilotA conveyor trips and three similar gates could be the cause.
An illustrative night on this kind of floor, and what Plant Cortex does at each point.
The trip
The belt stops on a transfer point alarm. The line has several gates with nearly the same name and different manuals.
The question
The operator asks about "the cut-off gate". Plant Cortex notices several look-alikes and asks which one, with the choices as taps, instead of answering for the wrong one.
The work
The right drawing opens from the same chat. A work order for the gate carries the parts reserved, and a checklist for the restart.
What stays
A preventive plan for the idlers and gate actuators is created by the meter or the calendar, so the next trip is less likely.
Where this floor gets hurt.
Look-alike manuals
Hand-wheel and pneumatic variants of the same gate, three flow control gates, several conveyors. The answer is scoped to the machine you meant.
Drawings buried in manuals
A general arrangement sheet is often a page inside an equipment manual. Drawings inside manuals are found by the same drawing search.
Preventive work that slips
Idler, gearbox and actuator plans on calendars or meter readings, with a compliance view.
A line where one conveyor stops everything
The stoppage log shows which conveyor costs the most hours, so effort goes where it pays.
- Belt conveyors
- Stackers and reclaimers
- Transfer chutes and gates
- Silos and hoppers
- Feeders and screens
- Dust extraction
The questions this floor asks, and what comes back.
Examples of shape only. The real content comes from your own manuals and drawings.
I want to see the drawing of the pneumatic cut-off gate
Comes back withThe correct drawing page opens, with look-alike variants offered as alternatives.
What is the greasing interval for the stacker slew bearing?
Comes back withA cited answer from the stacker manual, or an honest "not in the manuals".
The modules that matter most here.
Scoped answers
When look-alikes exist, the answer says which manual it used and offers the others.
Drawing finder
Real drawing pages found by what they show, including sheets inside manuals.
PM plans
Calendar or meter based plans that raise a work order on time.
Downtime Pareto
The conveyor that costs the most hours, ranked, with hours and dollars.
Other floors.
Cement & Minerals
Long chains of heavy machines, from many suppliers, where one trip travels downstream.
See this floor
Steel & Metals
Heat, cranes and hydraulics, where the margin for a wrong step is thin.
See this floor
Power Generation
Outage seasons where dozens of crews work on connected equipment at once.
See this floor
Chemicals & Process
Hazardous service, where the paperwork is part of the safety system.
See this floorBring the manuals for one bulk materials handling unit.
A few real documents, a few weeks, and success criteria agreed up front.